Whether you need to lift a bus, fleet vehicle, or fire truck, BendPak’s PCL-16HD lift system is designed to meet your needs. This super-duty portable column lift system has a combined lifting capacity of 99,000 lbs. and takes just over one minute to reach the maximum lifting height of 67”. Each column features a mechanical locking system, flow control check valve, pressure relief valve and trouble-free hydraulics for increased safety and reliability. A unique hydraulic control system allows operators to lower the columns manually in the event of a power supply failure. Microprocessor controls combined with a unique hydraulic synchronization system ensures very smooth movement over the entire journey; from floor, to maximum lifting height and back. A hydraulic pallet-truck mechanism, coupled with a tight turning radius, enables one person to move the columns effortlessly. The PCL-16HD system's controls are easy to use and feature up / down and emergency stop buttons. Includes the added convenience of three separate operation modes: single, pair or set.

The PCL-16HD-6 is the six-post configuration of the PCL-16HD series. If you need a four-post configuration, check out the PCL-16HD-4.

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for complete listings or contact BendPak via contact@bendpak.com.

• 16,500-lb. individual column capacity
• 99,000-lb. maximum system capacity
• Four modes of operation: single, pair or all six
• 67" lifting height for tall mechanics
• Extended 15" forks accommodate super-wide tires and deep wheel configurations
• Multi-width wheel forks with locking pins accommodate the widest range of wheels eliminating the need for specialty wheel adapters
• Integrated electronic feature self diagnostics functions
• Independent column control stations eliminate the need for a single master control column
• Trouble-free hydraulic lifting system
• Low power consumption
• Separate key lock security for each control box
• Fuse protected
• Sealed rollers on the wheels for easy movement of the columns
• Sealed roller bearings on carriages for a lifetime of trouble-free service
• Space-saving design and reduced column weight
• A tight turning radius provides easy mobility
• Automatic synchronization and communication between columns for precise, level lifting
• Multiple, automatic, independent safety locks ensure safe operation
• Quick-disconnect plugs at each column for fast and efficient set up
• Simple operation, long service life and minimum maintenance
• Operator monitoring and automatic leveling control
• Set the vehicle on jack stands and use the columns to raise another vehicle in an adjoining bay
• Low-profile fork angle for easy positioning of columns, especially for floatation tires
• Low mounted weight distribution of power unit and controls means a low center of gravity, allowing the columns to move easier than top heavy screw-drive columns
• Durable powder-coat finish

---

• Max column capacity: 16,500 lbs. / 7,484 kg
• Max system capacity: 99,000 lbs. / 44,905 kg
• Min column height: 89" / 2,255 mm
• Max column height: 144-3/4" / 3,675 mm
• Max lifting height: 70" / 1,778 mm
• Length lifting fork: 15" / 381 mm
• Overall length: 47-3/4" / 1,210 mm
• Min width inside lifting fork: 11" / 280 mm
• Max width inside lifting fork: 23-1/2" / 597 mm
• Overall width: 43-1/2" / 1,100 mm
• Turning circle: 40" / 1,016 mm
• Column weight: 549 lbs. / 1,210 kg
• Lifting speed: 110 sec
• Motor: 2 Hp / 208 V – 230 V / 50 Hz – 60 Hz / 3 Ph
• Shipping weight: 1,394 lbs. / 634 kg (Ea. post)
• Shipping dimensions: 72" x 42" x 96" / 1,829 mm x 1,067 mm x 2,438 mm (Ea. post)

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for complete listings or contact BendPak via contact@bendpak.com.