BendPak SP-7X

FREE SHIPPING!
(contiguous 48 states)
This item ships directly from the factory.
Estimated Delivery Time:
11 - 16 Business Days

SP-7X
Bend Pak
SP-7X
Price: $5,220
Yours $4,535

Free Shipping Continental US
Direct shipping points only.
Surcharge may apply to rural &
interline points.

Quick Specs

Lifting capacity:	7,000 lbs.
Lifting height:	68"
Lowered height:	5"
Overall length:	163-1/2"
Overall width:	74-1/2"
Lifting time:	45 sec
Shipping weight:	2,318 lbs.

Description Model SP-7X

When you need to add versatility and productivity to your shop or garage, your first stop should always be BendPak. The SP-7X is the mighty 7,000-lb., full-rise scissor lift that won't hog your precious floorspace and fits nicely into narrower bays. A frame engaging lift, it easily accommodates most passenger vehicles and light trucks and comes replete with pneumatic safety locks, rubber lifting blocks and an open center for full under-car accessibility. Always bet on BendPak for increased durability, safety and productivity. You aren't going find comparable quality or value anywhere else—BendPak always bests the rest.

Electric / hydraulic power system
We incorporate maintenance-free electric hydraulic power systems into each lift for ultimate dependability, and all controls are conveniently located within close reach.

Dual-cylinder design
Each scissor lift is equipped with 2 hydraulic cylinders for maximum performance, reliability and precise leveling. The dual-cylinder design maintains constant level and safety using cross flow hydraulic technology, pressure flow control and integrated velocity fuses. Our industrial-grade hydraulic cylinders feature a single-piece, pilot fitted, machined steel piston, wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands to virtually eliminate fluid bypass. The micro-smooth chrome-rod is machined from high-yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001" diametrically, to ensure superior cylinder operation and life. The superior-designed high durometer, mechanically-loaded rod seals make rod leakage is a thing of the past while a specially formulated abrasion-resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from robust steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth and last a very long time. An integrated flow restrictor provides a controlled descent in the case of an unexpected hose rupture.

Large base frame
Heavy boxed-steel formed base frame provides solid stability.

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for complete listings or contact BendPak via contact@bendpak.com.

Features and Specifications

7,000-lb. lifting capacity
Extended pull-out top lift platform
Pneumatic safety locks
Equalization torsion bar
Hardened pivot pins with "Zirk" fittings
Open-center design
Ergonomic controls
Dual-cylinder hydraulic design provides extra power
Low-profile

Lifting capacity: 7,000 lbs. / 3,175 kg
Max lifting height: 68" / 1,727 mm
Overall length: 163-1/2" / 4,153 mm
Overall width: 74-1/2" / 1,892 mm
Lift platform: 21-1/2" x 63" – 70" / 47 mm x 1,600 mm – 1,778 mm
Lowered height: 5" / 127 mm
Width between pads: 31-1/2" / 801 mm
Lifting time: 45 sec
Motor: 220 VAC / 60 Hz / 1 Ph
Shipping weight: 2,318 lbs. / 1,054 kg
Shipping dimensions: 106" x 76" x 46" / 2,692 mm x 1,930 mm x 1,168 mm

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for complete listings or contact BendPak via contact@bendpak.com.

Service is our Specialty
BendPak has over 650 installation and service centers located in the United States. These fully equipped installation and service centers have specialty service fleets that make a living installing and servicing large car dealerships, national accounts, auto repair centers and occasional auto enthusiasts and DIY'ers.

BendPak customers are supported by a specialized service program known as Certified Service SM. Our fully staffed Customer Care Center (CCC) is available to meet all of your support needs including highly responsive technical support; one‐on‐one communication with account representatives and technical experts; electronic data interchange (EDI); a highly‐efficient logistics support chain, automated dispatch and communications system and a tightly integrated system that allows incident management; trouble‐shooting and reporting to be seamlessly provided to customers seamlessly, regardless of location.

Product Images Model SP-7X